Car is one of the most important things that we use in our daily life. Some of us just use it for our daily drive and some of us like to mod the car. So, If you are looking for the best tranny tubes (Shemale Tubes) for your car, you came to the right place. Here is our top 5 pick for your tranny tubes.
1. Proform 68052 Screw-In Engine Dipstick
Meet our first pick shemale tube from the list a flexible stainless steel shemale tranny tube. It can fit in with 1981 351 Windsor. It’ll fit into the oil pan and give a correct oil level reading. Although it’s not suitable for stock replacements.
Dimensions: 18.6 x 4.4 x 4.3 inches
Weight: 4 ounces Brand: ProForm
2. TH350 / TH400 Firewall Mount, Flexible, Braided Stainless/Aluminum Racing Power Transmission Dipstick
TH350/400 is one of our favorite picks when it comes to shemale tubes. This is one of the most durable dipsticks we’ve ever tested, Best this about this tranny tube Dipstick is that you don’t need to drop the transmission pan to install it. And it’s 12 to 14 inches long.
Dimensions: 17.5 x 7.75 x 1.5 inches
Weight: 14.1 ounces Brand: Racing Power
3. Spectre Performance 57311 Tranny Tube
Specter tranny tubes are our best choice for a Chevy setup. It can fit an L-31 Chevy crate engine and every other Chevy LS engine. It’s flexible and stainless steel so you don’t need to worry about breaking it over time.
Length: 18 inches
Weight: 5.6 ounces Brand: Spectre
4. Lokar XTD-30C4FMPAN Pan Firewall Mount Transmission Dipstick for Ford C-4 Transmission
If you are driving a Ford and need a Dipstick then Lokar XTD-30C4FMPAN tranny tubes are the best option for you. It’s a firewall mount transmission dipstick with black stainless steel housing is the best tranny tube. It can fit all For C-4 Transmission.
Dimensions: 18 x 8.75 x 1.5 inches
Weight: 1.04 pounds Brand: Lokar
5. Lokar X1210137 Transmount Transmission Dipstick with Lock
Last on our list, we have Lokar X1210137 tranny tubes. It’s an Anchor-Tight locking and flexible stainless steel trans dipstick. This tube can fit in all GM Powerglide transmissions.
Dimensions: 23.25 x 6.13 x 1.25 inches
Weight: 1.03 pounds Brand: Lokar
How to Use a Tranny Tube
The first step is to remove the tranny tube dipstick from its slot on top of your car’s engine block (or wherever else it may be located). Then, dip this tool into some oil until it gets full enough that you see some liquid coming out onto its surface but not so much that it spills all over itself. If this happens, then put some more drops onto another part of your vehicle before continuing with this procedure again; otherwise, simply retrace steps 3-5 until everything works out okay again.
- Don’t forget to push the tranny tube push all the way in. If it isn’t, you’ll get an inaccurate reading on your dipstick and need to remove it and push it back in again before getting any readings.
- Use a flashlight or other light source to check that there are no leaks around where pins go into their holes: if there are any leaks, they will show up as white spots when using this method of checking for leaks instead of just seeing black smears on them (as would happen with carbon build-up).
Make sure it’s been at least 150 miles since the last oil change. Oil is a lubricant that keeps your engine running smoothly and keeps it clean, which helps keep your engine running more efficiently.